Open today: 09:30 - 13:00 | 15:00 - 18:00
1 / 0
Ortofon
Stylus Brush (Fibre)
Ortofon fibre brush for cleaning the stylus
Use Ortofon Stylus fiber brush a few times along the cantilever in the direction of the stylus tip, whenever you play a new record or change sides.
Use the brush in the forward direction from the rear of the cartridge towards the stylus tip and never from stylus tip to the rear of the cartridge and never from side to side. Following this treatment there will normally be no need for further stylus cleaning.
15.75€*
*Taxes included, shipping price excluded
Other items you may like:
The MIX is a general-purpose model for scratch and back-cueing. Provides great performance and durability. It has a good quality spherical stylus, a solid cantilever, and serves general purposes well. It offers both reasonable output, high sound quality and a good tracking ability for virtually any style of music. With transparent sound across the spectrum and excellent handling ability, the MIX represents one of the longest running values in DJ cartridges.Excellent price-to-performance ratio.- Frequency range: 20-20.000 Hz- Output voltage at 1000Hz, 5cm/sec.: 6 mV- Channel balance at 1kHz: 1,5 dB- Channel separation at 1kHz: 20 dB- Channel separation at 15 kHz: 15 dB- Tracking ability at 315 Hz at recommended tracking force: 100 μm- Compliance, dynamic lateral: 14 μm/m N- Stylus type: Spherical R 18 μm- Tracking force range: 2 - 4 g- Tracking force recommended: 3 g- Internal impedance, DC resistance: 700 Ohm- Internal inductance: 450 mH- Recommended load resistance: 47 kOhm- Recommended load capacitance: 200-600 pF- Cartridge weight: 18,5 g
The Ortofon Libelle for setting your turntable and accurate mount level measurement- Bubble level for plate adjustment- Easy to use to know if your plate is flat- 40mm diameter
Pro replacement stylusGreat performance and durability as to basic scratch and back-cueing is what the Pro is known for.It has a good quality spherical stylus, a rock-solid cantilever, and serves general purposes well.The Pro is the logical alternative to the more expensive expert carts. It offers both reasonable output and high sound quality which is, in fact, all there is needed to entertain an audience.The Pro Series of cartridges provides a great balance of sound quality with tracking ability, for virtually any style of music. With flat, transparent sound across the spectrum and excellent handling ability, the Pro Series represents one of the longest running values in DJ cartridges.Ideal choice for talented, but less experienced DJs.- Output voltage at 1000Hz, 5cm/sec.: 5 mV- Channel balance at 1kHz: 1,5 dB- Channel separation at 1kHz: 20 dB- Channel separation at 15 kHz: 15 dB- Frequency response: 20-20.000 Hz +3/-2 dB- Tracking ability at 315 Hz at recommended tracking force: 70 μm- Compliance, dynamic lateral: 7 μm/m N- Stylus type: Spherical- Stylus tip radius: R 18 μm- Tracking force range: 3.0-5.0 g (30-50 mN)- Tracking force recommended: 4.0 g (40 mN)- Tracking angle: 20°- Internal impedance, DC resistance: 750 Ohm- Internal inductance: 450 mH- Recommended load resistance: 47 kOhm- Recommended load capacitance: 200-600 pF- Concorde/OM cartridge weight: 18.5 / 5.0 g- Compatible with cartridges: Pro
Nightclub E replacement stylusNightclub E is equipped with Special Elliptical diamond. Perfect for usage in clubs. Superb sound quality.Club DJs and studio workers believe the Nightclub E to be an absolute high-end cartridge. It is indeed a no-nonsence performer with fascinating musical resources.It's output is superb with a frequency responce rating high enough to compare the Nightclub E to any audiophile cartridge.The special elliptical stylus guarantees sound with insignificant scratching.- Output voltage at 1000Hz, 5cm/sec.: 8 mV- Channel balance at 1kHz: 1,5 dB- Channel separation at 1kHz: 23 dB- Channel separation at 15 kHz: 15 dB- Frequency response: 20-20.000 Hz +/- 1.5 dB- Stylus type: Elliptical- Tracking force range: 2.0-5.0 g (20-50 mN)- Tracking force recommended: 3.0 g (30 mN)- Tracking angle: 20°- Internal impedance, DC resistance: 1000 Ohm- Internal inductance: 580 mH- Recommended load resistance: 47 kOhm- Recommended load capacitance: 200-600 pF- Concorde cartridge weight: 18.5 g
The stylus protection guard helps to limit stylus damage, if the cartridge accidentally slides across a record or if the cartridge is dropped onto the record.The protection caps come in pairs.
OM Q.Bert for scratch and back-cueing.High tracking ability, unsurpassed handling. Ultra high output. Low wear characteristics that literally put it in a class of its own.Turntablists and mix DJs alike will appreciate the strong output of this cartridge, coupled with unrivaled tracking ability and sonic characteristics. The Q.Bert features a more subdued high end, which helps to minimize surface noise from worn vinyl, and an accentuated mid-range to help bring scratching to the front of the sound stage.The Q-Bert has a supreme ability to trace the grooves of your records and it is tailored specifically for scratch. Due to its enomous output, it is perfect for scratch of all music with deep bass frequences.- Frequency range: 20-18.000 Hz- Output voltage at 1000Hz, 5cm/sec.: 11 mV- Channel balance at 1kHz: 1,5 dB- Channel separation at 1kHz: 22 dB- Tracking ability at 315 Hz at recommended tracking force: 90 μm- Compliance, dynamic lateral: 12 μm/mN- Stylus type: Spherical- Stylus tip radius: R 18 μm- Tracking force range: 2 - 4 g- Tracking force recommended: 3 g- Tracking angle: 20°- Internal impedance, DC resistance: 1.680 Ohm- Internal inductance: 920 mH- Recommended load resistance: 47 kOhm- Recommended load capacitance: 200-400 pF- OM cartridge weight incl. extra weight: 5 g